Axel A110130000 User Manual Download Page 48 | Manualshive

Page: 48 / 79

Axel A110130000 User Manual Download Page 48

DETAIL OF AUDIO CHANGEOVER REMOTER

| DETAIL OF AUDIO CHANGEOVER REMOTER

48

7.9 PROGRAM SETTINGS SECTION

This part will explain how to see and manage all the optional features of Fox. In addition, it is possible to see a summary
of the functions and the device connection data.

In this panel, it is possible to see and set a number of parameters of the FOX program.
The  "Show  PeakMeter"  checkbox  represents  the  ability  to  also  see  the  PeakMeter  in
displays  of  the  indications  of  input  and  output  level.  The  "Stay  on  top"  checkbox
represents the ability to keep the command software of Fox in the foreground.

In this Connection Information panel it is possible to see a summary of the mode
of  connection  of  the  FOX  device  with  respect  to  the  software  for  management
and control. Specifically to the side it is possible to see the connection mode in
TCP/IP, the address and the port being used.

This panel provides a summary of the FOX model being used, the name of the
device, the version of the Firmware installed on the device DSP and the unique
Firmware code assigned to each individual device.

Panel devoted to disconnection of the device from the TCP/IP or Serial
connection.

«
...
46
47
48
49
50
...
»

Summary of Contents for A110130000
















































































Reviews:

No comments