
ATEX Retractor System TANKO-RT/-RTS
4 Transport and Storage
Translation - Operating/installation instructions 2020/01
49/121
4
Transport and Storage
AWH products are checked carefully before they are dispatched, and are packaged in accordance with
the respective transport and storage conditions. However, it is NOT possible to rule out the possibility of
damage during transportation completely.
NOTE ON EXPLOSION PROTECTION
Transport and storage of the device in a potentially explosive atmosphere are
PROHIBITED!
If this is not observed, the explosion protection could be disabled.
CAUTION
Risk from protruding sharp edges on the device!
Depending on the design, the device may have protruding sharp edges that can be
dangerous when handling it.
There is a risk of minor cuts.
Wear protective gloves when working on the device.
When handling, e.g. unpacking, transportation without packaging,
assembly/disassembly and maintenance work, beware of protruding sharp edges.
In the event of damage (including cases involving spare and wear parts), please contact AWH
immediately with a damage report.
Scope of Delivery
–
Container cleaning device
Retractor system TANKO-RT with rotating spray head (alternatively, also static spray head) or
retractor system TANKO-RTS with static spray head (alternatively also with rotating spray head),
o
equipped with
5 limit switches incl. mounts, 2 throttle check valves for the power cylinder and 1 plug
connection for the locking cylinder, 1 resistance thermometer
o
The scope of delivery of the combination adapter C3 process connection continues to include
1 combination vessel connector C3 or container adapter 30 plus bracket
–
Operating and/or installation instructions (including Declaration of Conformity)
–
Technical documents in accordance with the order (e.g. Instructions for sensors, certificates and
reports)
NOT included in the scope of delivery:
–
Fasteners required for fastening the device to the container (e.g. screws, nuts, clamps)
–
Seals
The scope of delivery ends at the interfaces of the device (see
Section 5.2.1 Interfaces
Refer to the delivery note and the order confirmation for full details of the scope of delivery.