ATEX Retractor System TANKO-RT/-RTS
94/121
Translation - Operating/installation instructions 2020/01
7 Maintenance
7.4.2
Tools and Tightening Torques
Use only proper tools that are required for performing the required work and approved for use.
Normal workshop equipment is sufficient for the mechanical work on the device. The following tools are
required:
–
Hexagon socket wrench (size 4)
–
Open-end wrench (WAF 10 mm, WAF 12 mm, WAF 14 mm; WAF 17 mm; WAF 24 mm)
–
18
–
Torque screwdriver with inserts and accessories
Figure 7.4-2: Tool for TANKO-RT/-RTS
Recommended assembly tools:
The following assembly tools can be purchased from AWH to facilitate assembly:
–
Assembly tool for wire locking pin, size A, Art. no. 664MW01010050
–
Assembly anvil for central bearing, Art. no. 664MW03020020
–
Assembly cone for central bearing, Art. no. 664MW03010020
Figure 7.4-3: Assembly tool 664MW01010050