AVT MAGIC TH6 POTS, Hardware & Software Manual

Page: 65 / 136

PAGE 65
O p e r a t i o n v i a W i n d o w s P C S o f t w a r e
• The Busy/Drop Tone may vary from country to country. Therefore, you
can measure the values with the function
Measure Values
under
BUSY/DROP Tone
. In this way you make sure that the system recognises
when a call is dropped or when the line is busy.
To measure the Busy/Drop tone you just need to e.g. call a busy line on
caller line 1 and press the button
Measure Values
.
• Under
High pass filter cut off frequency
you can select different filter
values for
Receive
and
Transmit
direction to eliminate disturbances in
the telephone signal. All signal parts below the selected frequency are
eliminated. The recommended setting is 300 Hz for both directions.
• Under
POTS line level adjustment
you can adjust the level for the tele-
phone signal separately for the Receive and Transmit direction.
5.6.4.2.5 POTS Interface: Outside Line
FIG. 42 POTS INTERFACE: OUTSIDE LINE
For configuration see
POTS Interface: PABX
(see CHAPTER 5.6.4.2.4,
Page 64).
NOTE
This menu can only be displayed if you are working with a MAGIC TH6
POTS system and the
POTS
operating mode is selected (see CHAPTER
5.6.4.2.2, Page 60).
POTS