PAGE 33
W i n d o w s P C S o f t w a r e
4.7
Menu Configuration
4.7.1
Submenu Control Interface
The system is configured and operated via the LAN interface.
Select under
Configuration
→
Control Interface
.
LAN
For controlling the system via the LAN interface please select
Ctrl. Interface
→
LAN (UDP)
.
FIG. 5
LAN PARAMETERS
Under
LAN Interface
please select
<Default>
. If there should be more than
one network interface card in your PC, select the desired one. If more than one
IP address is assigned to a network interface, please make sure you the select
the correct one. The IP addresses are displayed together with the network in-
terfaces.
Under
IP Address
you need to enter the IP address of the
MAGIC EEC
. The
standard IP address of the system is
192.168.96.102
and the standard control
Port
10000
. The default interface is the
LAN 1
interface.
To enable a connection with your PC, you have to be in the same
subnet
.
Therefore, please enter an IP address from your subnet
1
.
To change the IP address of the
LAN 1 interface
at the front keypad of the sys-
tem, press the softkey
Menu
→
system settings
→
LAN Interfaces
→
IP Ad-
dress
. Enter now the desired IP address. When entering manually you have
to be sure that the IP address is not already used by another unit
2
.
Please enter the correct IP address of the system under
IP Address
.
1
In this way you can find out your own subnet: Under
Windows XP
click on
Start
→
Execute ...
.
Enter
cmd
in the command line. An entry window is displayed in which you must enter
ipcon-
fig
. Your IP address is displayed (e.g. 192.168.12.35). Your subnet is accordingly 192.168.12.xxx.
NOTE
Maybe further settings are necessary (e.g. sub-net mask, standard:
255.255.255.000). In that case please contact your network administrator, who
can tell you the correct settings.
TIP
The currently allocated IP address of the system can be displayed by pressing
the right telephone button
.
2
To check if the IP address is already used in the network, follow the instructions: Under
Windows
XP
click on
Start
→
Execute ...
. Enter
cmd
in the command line. An entry window is displayed
in which you must enter
ping
xxx.xxx.xxx.xxx. Whereas xxx stands for the IP address you want
to check.
Summary of Contents for MAGIC EEC
