PAGE 30
W i n d o w s P C S o f t w a r e
–
Error Level 1
:
This LED indicates that the Error Level is 1.
–
Error Level 2
: This LED indicates that the Error Level is 2.
–
Error Level 3
: This LED indicates that the Error Level is 3.
–
Header CRC
: This alarm is set if the CRC header is faulty.
–
MST CRC
: This alarm is set if the CRC MST is faulty.
–
Frame Counter
: The frame counter is not continuous.
–
Frame Phase
: The frame phase is not continuous.
–
Frame Length
: The indicated frame length is wrong.
–
LI TIST
: The LI TIST is not continuous.
The number of Audio and Data subchannels is displayed under
No. Sub-
chan.
(Number of Subchannels).
Under
FIC included
you can see if the Fast Information Channel (FIC) is in-
cluded into the ETI data stream.
Also displayed are the
DAB Mode
and the
Frame Length
.
4.5.3.3
E1 Output
The following alarms are displayed under
E1 Output
. Next to the LEDs you
can see the number of the occured alarms.
–
Output open
: There is no further processing unit.
–
Output shorted
: 2-Mbit/s output is shorted.
4.5.3.4
Interface 2: E1 Output (monitoring output)
The following alarms are displayed under
Interface 2: E1 Output (monito-
ring output)
. Next to the LEDs you can see the number of the occured alarms.
–
Output open
: There is no further processing unit.
–
Output shorted
: 2-Mbit/s output is shorted.
NOTE
This information will only be displayed if your
MAGIC EEC
system has the
optional Monitoring Output (system version ID 800891).
TIP
The output alarm messages can be disabled for
Interface 2
under
Configu-
ration
→
System
→
Operation Settings
→
E1 Interface
.
Summary of Contents for MAGIC EEC
