AVT MAGIC EEC, Hardware & Software Manual, Page: 45 / 82

PAGE 45
W i n d o w s P C S o f t w a r e
4.7.2.3.4 SNMP Parameter
To integrate the MAGIC EEC into a network management system, the SNMP
function can be used.
FIG. 17 SNMP PARAMETER
Under SNMP Parameter the function can be activated by enabling the option
SNMP
.
Please ask your network management system administrator for the correct
SNMP settings.
• First you need to select which
SNMP Version
you use. Currently SNMP
v1
and
v2c
are supported.
• The
Read Community
entry is an identifier to read data. The name has to
be identical with the name in your Management System. By default, the
name
public
is used.
• Under
Trap Community
you define the name for the trap datagrams. The
name has to be identical with the name in your Management System.
• Please enter the port on which MAGIC AD1 ETI receives messages under
SNMP Port
. The default setting is usually
Port 161
.
• MAGIC EEC allows the addressing of up to four different Network Man-
agement Systems. Please enter the corresponding IP addresses and Ports
under
NMS 1 (IP Adr./Port)
,
NMS 2 (IP Adr./Port)
,
NMS 3 (IP Adr./Port)
and
NMS 4(IP Adr./Port)
.
• Under
System Description
you can assign a name for MAGIC EEC .
• Under
Contact
an email address can be entered.
• Under
System Location
you can enter the location of the switch.
NOTE
The settings
System Description
,
Contact
and
System Location
are values
of the standard System Group in RFC1213 MIB-II (if SNMP v1 is used) and
RFC3418 SNMPv2-MIB (if SNMP v2 is used).