manualshive.com logo in svg

Avocent DSR Series DSR2035, Installer/User Manual, Page: 31 / 114

Share
Download
Avocent DSR Series DSR2035 Installer/User Manual Download Page 31

 Chapter 2: Installation        

19

Novell NetWare

To adjust the mouse speed and pointer settings for NetWare v5 and v6 drivers:

Novell NetWare versions 5 and 6 are not delivered with a method for changing the mouse 
acceleration. An NLM (NetWare Loadable Module) jointly developed by Avocent and Novell is 
available from the Avocent web site which may be used to properly align the mouse.

1. In a web browser, enter 

http://www.avocent.com

 to visit the Avocent web site home page.

2. On the Avocent web site home page, click the 

Support

 link to go to the Technical Support 

web page.

3. On the Technical Support web page, click the 

Knowledge Base

 link to go to a page containing 

Avocent hardware and software products.

4. Select the 

DSView

 link to list DSView software subcategories to the right of the Avocent 

hardware and software products.

5. Select the 

Configuration and Installation

 link to go to a web page containing DSView software 

configuration and installation information appears.

6. Select the 

DSView Software Mouse Alignment with Novell GUI Netware 5 and 6

 link. The 

Technical & Support Notes web page appears.

7. Follow the instructions on the web page.

To adjust the mouse speed and pointer settings for NetWare v6.5 drivers:

1. While running the DSView management software, click the 

Novell

 button on the toolbar at the 

bottom of the Avocent Session Viewer window.

2. From the pop-up menu, select 

Settings - GUI Environment

.

3. After the GUI Environment window displays, select the 

Input

 tab.

4. Disable mouse acceleration by making sure that the Acceleration Disabled checkbox 

is selected.

5. Resynchronize the mouse in the software remote session window for the Avocent management 

software you are using.
•

If you are using DSView software version 2.x or earlier, click 

Mouse Align

.

•

If you are using DSView software version 3.0 or later, click 

Align Local Cursor

.

•

If you are using the AVWorks software, click 

Screen Refresh

.

The mouse resynchronizes and should work properly.

Summary of Contents for DSR Series DSR2035



















































































































Reviews:

No comments