V-Series Dobby Loom User’s Manual
Weaving Instructions
Warping The Sectional Beam
Page | 86
Figure 70 - Place Raddle in Lower Position
15)
Take the extension cord from your beam. Create a larks head loop
at its end and loop it around the knotted end of your warp section.
Figure 71 - Place Extension Cord Around Thread Bundle
16)
Before the last part of the threads pass through the raddle, tape the
threads on the loom-side of the raddle in their sequence using
masking tape. This will help you keep the threads in order when
you thread the harness.
17)
As you wind on, pivot the raddle to adjust the width of the section
to fit exactly in-between the pegs on your sectional beam.
