V-Series Dobby Loom User’s Manual
Weaving Instructions
Warping The Sectional Beam
Page | 83
Figure 64 - Adjust Wind-off Tension
3)
Adjust Warp Length using different spool placement by moving the
spools on the arms.
4)
Reset the Revolution Counter to Zero
5)
Setup Cones with the Cone Caddy
Making the First Section
6)
Open and secure the raddle top using the removable pin.
7)
Slide the thread(s) under the metal catch clip, tails facing to the
left. Tails should be about 5 inches long.
Figure 65 - Catch Thread Ends
