V-Series Dobby Loom User’s Manual
Loom Assembly
Connecting the Frames
Page | 19
ends of the rod and tighten them against the wood supports. The
other parts will be positioned and tightened later.
6)
From left to right, the parts should be mounted as follows:
1 Stop Collar
Right Side Frame #3
1 Stop Collar
1 Cam/Pulley Assembly
2 Stop Collars
1 Return Pulley
Right Side Frame #4
1 Stop Collar
Figure 7 - Cam/Pulley Assembly Installed
C
ONNECTING THE
F
RAMES
Install The Lower Rear Cross Member
In the next stage of assembly, you’ll attach the cross members that connect
the Left and Right Side Frames.
1)
Please locate: Lower Back and the Cross Member Hardware Pack.
2)
Sort the hardware. Select four 3-1/4” hex bolts, with square nuts.
Remove the nuts.
3)
You will need to pivot both frames forward 90 degrees so that they
lay on their Front Verticals (#2) (see Figure 3-6).
Note:
Do this in whatever method is most comfortable and safe for you. One
method is to brace both side frames on their feet, about 2’ apart, with their
