V-Series Dobby Loom User’s Manual
Weaving Instructions
Warping The Sectional Beam
Page | 84
8)
Bring the thread(s) up and over the left side of the top spool so that
you are ready to wind the Warping Wheel in a counter clockwise
motion.
Figure 66 - Wind Counter Clockwise
9)
After you have wound one length bring the thread(s) around the
back of the raddle and through a dent (working from right to left).
Figure 67 - Bring Thread Through Raddle
10)
Bring thread(s) down over the end you just wound and secure in
the silver clip (swooping under from left to right).
Tying Off
11)
Put the raddle top back on. Cut the bout threads just to the left of
the clip and under the threads going over the wheel.
