Avidyne IFD410 FMS/GPS, Pilot'S Manual

Page: 356 / 380

IFD400 Series Pilot Guide
6-64 General

Configuration Log
– This set of .txt files contains
various system settings, states, and calibrations at power
down.
To download logs, start the IFD in maintenance mode (see
Maintenance Mode section on page 6-53). Once maintenance
mode has started, press the right side of the AUX page key to
select the “Logs” tab. Note that if maintenance mode was
started using the "Download Logs" button, the "Logs" tab will
already be active. Insert a USB fob into the USB port.
Datalogs Download Page (Maintenance Mode)
The Logs tab in maintenance mode shows a list in the center of
the display containing the list of logs that can be downloaded.
Use the right knob on the IFD to scroll the cursor up and down
and then use the knob button to select the item surrounded by the
cursor to be downloaded. You can also move the cursor by
touching items in the list and then touch the item surrounded by
the cursor again to select it. When an item is selected, a
checkmark will appear on the right side of the list. Pressing the
knob button or touching an item when the item surrounded by the
cursor is already selected will cause the item to be deselected.
All items in the list can be selected or deselected at once using
the "Select All" and "Un-Select All" LSKs.
The “Logs” LSK provides two options - "Full" and "Since Last".
The "Full" option causes
all of the data each selected log to be
downloaded. The "Since Last" option causes only that data
which has been logged
since the last time a download was
completed to be downloaded. Since the logs contain a large