Avidyne IFD410 FMS/GPS Pilot'S Manual Download Page 161

Page: 161 / 380

IFD400 Series Pilot Guide

Aux Subsystem

4-1

4 Aux Subsystem

The Aux subsystem contains several tabs, as shown below, to
control various utilities, system setup, and the alert message
center.

The AUDIO tab provides control and display of all system audio-
related features.

The UTIL tab provides access to several timers, calculators, and
checklists.

The SETUP tab provides options to allow the user to set
preferences in the display and control of the system.

The SYS tab provides the means to review the status of software,
databases, GPS, and datalink.

The ALERT tab shows details of active cautions, warnings, and
advisories.

Summary of Contents for IFD410 FMS/GPS





























































































































































































































































































































































































Search results

Summary of Contents for IFD410 FMS/GPS

Reviews:

Related manuals for IFD410 FMS/GPS

Brands by name

Popular brands

Avidyne IFD410 FMS/GPS, Pilot'S Manual

Search results

Summary of Contents for IFD410 FMS/GPS

Reviews:

Related manuals for IFD410 FMS/GPS

Brands by name

Popular brands