Avidyne IFD410 FMS/GPS Pilot'S Manual Download Page 203

Page: 203 / 380

IFD400 Series Pilot Guide

Aux Subsystem 4-43

Datablock Item Title

and Image

Content

Track Angle Error

Track angle error (error in degrees
between desired track and actual
track) and an arrow indicating direction
to fly to correct the error.

Desired Track

Desired track for active flight plan leg.

Cross Track Distance

Cross track deviation from current
flight plan leg.

Next Desired Track

Desired track for the next flight plan
leg (not the active flight plan leg).

Vertical Speed
Required

Vertical speed required to make next
down-path altitude constraint. All
constraints are considered

“at” for

purposes of this computation.

Navigation Mode

IFD navigation mode (e.g. OCN,
ENRT, TERM, APPR) including the
GPS Nav mode (e.g. LPV,
LNAV/VNAV, LNAV+V, LNAV, LP).

Summary of Contents for IFD410 FMS/GPS





























































































































































































































































































































































































Search results

Summary of Contents for IFD410 FMS/GPS

Reviews:

Related manuals for IFD410 FMS/GPS

Brands by name

Popular brands

Avidyne IFD410 FMS/GPS, Pilot'S Manual

Search results

Summary of Contents for IFD410 FMS/GPS

Reviews:

Related manuals for IFD410 FMS/GPS

Brands by name

Popular brands