Avidity Science Pico PICO10T2, Operation Manual

Page: 7 / 40

Avidity Science, LLC Pico Water Purification System Operation Manuall
Introduction
1
Introduction
The Pico water purification system produces Type 2 (1 to 15 M

/cm) or Type 3 water at a rate of 10 to
20 liters per hour with the option of ultraviolet sterilization. The processed water is stored in a 35 liter res-
ervoir (
A ) which can be dispensed with an included manual dispensing tap ( B ) as required.
All components are assembled around a reservoir chassis and are protected by a plastic housing designed
for bench or wall-mounting. The plastic covers (
C ) can be removed for access to replaceable components.
Two threaded ports ( D ) on each side of the unit are for connecting equipment utilizing the purified water.
All water and power connections and pressure adjustment ( E ) is located on the side of the unit.
All recorded data, warning messages and water quality information can be viewed from the controller
display (
F ).
Figure 1. Pico Water Purification System
Pico Water Purification Models
The content in this manual applies to these models. Some models include an optional submersible ultravi-
olet (
UV ) light for sterilization.
Table 1. Pico Models
Model
Product
Water
Quality
Product
Water Flow
Rate Model
Product
Water Quality
Product
Water Flow
Rate
PICO10T2 Type 2 10 liters/hr PICO10T3 Type 3 10 liters/hr
PICO10T2UV Type 2 10 liters/hr PICO10T3UV Type 3 10 liters/hr
PICO20T2 Type 2 20 liters/hr PICO20T3 Type 3 20 liters/hr
PICO20T2UV Type 2 20 liters/hr PICO20T3UV Type 3 20 liters/hr
B
A
F
C
E
D