Avidity Science Pico PICO10T2, Operation Manual

Page: 18 / 40

Pico Water Purification System Operation Manual Avidity Science, LLC
12
Installation and Setup
9. Press firmly at the center of the 12-month timer label sticker until a thin red line appears. See Fig-
ure 7.
Figure 7. Red line shows RO module 12-month timer is activated.
10. Take one of these actions.
Install DI Cartridge (for Type 2 water quality only)
Type 2 water requires de-ionization of the RO water. Follow this procedure.
1. If necessary, remove the left front cover of the Pico unit.
2. Remove the DI cartridge from its packaging.
3. Be sure the green RO water outlet tube and white reservoir inlet tube are connected according to
the color labels on the cartridge.
Figure 8. DI cartridge tube connections.
If the required water is... Then,...
Type 2, Go to section Install DI Cartridge (for Type 2 water quality only) on page 12.
Type 3, Go to section Empty the Reservoir Tank on page 13.