Avidity Science Pico PICO10T2, Operation Manual

Page: 19 / 40

Avidity Science, LLC Pico Water Purification System Operation Manual
Installation and Setup
13
4. Secure the tubes into the clamps near the connections.
5. Replace and secure the left front cover of the Pico unit.
Rinse DI Cartridge (for Type 2 water quality only)
The DI cartridge must be rinsed before first use. Follow this procedure.
1. On the control display, press .
2. Press .
3. Select TC023 .
4. When Remove old TC023 appears, touch
5. When instructed to insert new TC023, touch . The module will rinse for 10 minutes.
6. When operation is complete, touch .
7. When operation is complete, press firmly at the center of the timer label button until a thin red line
appears. See Figure 9.
Figure 9. Activate DI cartridge 6-month timer.
8. Replace the left cover over the unit.
Empty the Reservoir Tank
Some water has accumulated in the reservoir during the setup process. Empty the reservoir to ensure opti-
mum quality of the first batch of water.