Avidity Science Pico PICO10T2, Operation Manual

Page: 20 / 40

Pico Water Purification System Operation Manual Avidity Science, LLC
14
Installation and Setup
Fill the Reservoir Tank
An optical sensor detects when the reservoir needs to fill and will issue a command to fill. Figure 10 shows
the screen indicating the reservoir is filling.
Figure 10. Screen displayed when reservoir is filling.
Figure 11 shows the screen indicating the reservoir is full.
Figure 11. Screen displayed when reservoir is full.
Reset RO Quality Set Point
The RO Quality set point is set at the factory. Circumstances may require changing the setting.
IMPORTANT: Contact Avidity Science Technical Support before changing the setting.
Follow this procedure.
1. Touch
2. Touch
3. Touch
4. Touch + or - for the desired RO quality setting.
5. Touch
15.0 MΩ