Avid Technology VENUE Local 16, Installation Manual

Page: 14 / 73

Setting Up a VENUE S6L System for the First Time 10
Unpacking and Assembling Basic System Components
Follow the instructions in this section to unpack system components, and make basic connections (power, monitor, and keyboard).
After completing this section, proceed to
Activating S6L System Components
.
Unpacking
When unpacking and assembling S6L system components, make sure at least two people are available at all times. Team lift all sys-
tem components.

Remove the S6L control surface from its shipping package, and place it on a table or other stable surface that leaves full access
to its front and back panels.

Remove the E6L engine from its shipping package and place it on a flat surface, leaving full access to its front and back panels.

Place any Stage I/O units on a flat surface.

Keep cables and other included items organized, making sure to keep them with their associated component after unpacking.
Installing the E6L Bezel
After mounting the E6L in a rack or other enclosure you can install the E6L bezel.
To attach the E6L bezel:
1
Locate the E6L bezel in the E6L package.
2
Put the bezel into position and connect the 1/8-inch connector to the jack on the front panel of the E6L.
3
Press the bezel into place and tighten the four captive screws to secure it to the E6L chassis.
The E6L engine can be installed in a road case or similar enclosure.
The E6L engine bezel ships separately in the E6L shipping package. Attach it to the E6L engine chassis after you have installed
the unit in an enclosure.
You can install the Stage 64, Stage 32, Stage 16, or Local 16 in an enclosure such as a road case. Rack ears for that purpose are
included in the Stage IO unit package. For installation instructions, see the S6L Stage IO Rack Supports.pdf.
Connecting the 1/8-inch connector