Avery Dennison SS Finisher, User Manual

Page: 8 / 72

Users Manual SS Finisher Operation

8
Customer Responsibility
Location of SS Finisher
The SS Finisher weighs approximately 114 Lbs. (52Kg). A table of
sufficient quality and strength to handle the load of the SS Finisher and
supplies must be supplied. The work sur
face recommended is 96” wide
x 30” deep x 32” high.
The SS Finisher should be located in an area that the ultrasonic noise
emitted from the cutting operation will not affect others. AVERY
DENNISON has taken many steps to keep the SS Finisher noise to the
lowest level. The SS Finisher is not recommended for an office
environment.
The power source of the SS Finisher should be a dedicated line. The
first sign that the SS Finisher is not being supplied with sufficient power is
the
ultrasonic’s will stop cutting, but the rest of the SS Finisher will appear
fully functional.