Avery Dennison SS Finisher, User Manual

Page: 41 / 72

Users Manual SS Finisher Appendix D
– Multi-color Contrast Sensor

41
11. Secure the harness to the frame with a wire
tie. Leave
approximately a 6” loop.
If the wire tie mount is still intact, use it. If not,
remove adhesive and clean area and place a
new wire tie mount in the same location.
12. Connect the sensor harness back to the
internal harness.
13. Secure the sensor harness to the inside of the
frame.
If the wire tie mount is still intact, use it. If not,
remove adhesive and clean area and place a
new wire tie mount in the same location.
Re-installing the Rear Cover
14
.
After all connections have been made and
wires secure, the rear cover can be re-
installed. Use the existing button head
screws removed from step 1.