Avery Dennison SS Finisher, User Manual

Page: 10 / 72

Users Manual SS Finisher Operation

10
Ultra Sonic Power Supply
Caution
Only qualified technicians should service the power supply.
The ultrasonic attachment is made up of several components. They are
the power supply, the horn assembly and the connecting cable. In
addition there is a knife assembly with a changeable tool steel blade.
The power supply should be located next to the SS Finisher. This unit
generates electrical pulses at 35 KHz to the converter. All guards must
be closed for the Sonics to be activated. The power supply contains a
"TEST" button, power indicator light, Auto/MAN switch, Cutting and US-
Time controls and a relative power gauge.
SG3510 CT
100
LOAD
50
100
200
100
6
MS
10
9
8 7
0
5
4
3
2
1
US-TIME
6
MS
1
10
9
8 7
0
5
4
3
2
1
TEST
CUTTING-CONTROL
POWER
OVERTEMP
OVERLOAD
TUNING
AUTO MAIN
10
ULTRASONICS
TELESONIC
TEST 2 10 20
The Ultrasonic Power Supply is pre-programmed for the correct settings
at the factory. The following instructions describe how to check and
change these settings.
IMPORTANT: FOR PROPER OPERATION, USE THE FACTORY
SETTINGS AT ALL TIMES. CHANGING THESE SETTINGS MAY
RENDER THE SONIC KNIFE INOPERABLE, REDUCE THE
QUALITY OF THE CUT AND/OR REDUCE THE RELIABILITY
OF THE SONIC KNIFE.
NOTE: The power supply is adjusted for proper operation at the factory.
DO NOT change any of the adjustments on the power supply.