Avery Dennison SS Finisher, User Manual

Page: 27 / 72

Users Manual SS Finisher Trouble Shooting

27
Instrument Panel
Single Screen Input
COUNTER 999999 STOPPED
LEN:XXXmm CUT: SPD:
Overview
The display has only three operator-input fields displayed at all times.
The left two gray keys at the bottom of the display control the cut length in
millimeters. The next two buttons adjust the cut position and the last
button is speed. The speed selection has little impact on machine
throughput.
Feed Length
To enter the proper label feed length - measure the label desired to be
cut from one registration mark to the exact same place on the next
registration mark as illustrated below. The feed length should be set to
76mm.
COPY AREA COPY AR
FEED
20 10 40 30 70 60 50 90 80 140 110 100 130 120
The feed length may have a value from 25mm to 129mm. Use the arrow
keys to

increase or

decrease the displayed value. The value will
change in single millimeter increments by holding the button or single
button pulses. The value that is displayed will be the new length - no
save or enter key is required.
Position the label registration mark so that the green light beam from the
sensor is just to the right of the registration mark. The light should be in a