Avery Dennison SS Finisher, User Manual

Page: 24 / 72

Users Manual SS Finisher Trouble Shooting

24
Sonic Troubleshooting
(See Section 4-5 of Branson Manual)
Problem Probable Cause Remedy
A - Sonics are not working
and power supply light is
off.
1
– Blown fuse
1
– Replace fuse on back end of power
supply.
2
– On / Off switch in “off”
position
2
– Move switch to “on” position
3
– Power lamp bulb burned
out
3
– The lamp could be off but power
supply cooling fan is running. Unit is
OK to operate.
4 - Interface cable not plugged
in
4
– Check interface cable between power
supply and SS Finisher
B - Sonic power supply is on
but no vibration is felt at
the converter in test mode.
1 - Cable to converter is bad. 1
– Replace the stack assembly.
2 - Converter is bad. 2
– Replace the stack assembly
3 - Horn is bad. 3
– Replace the stack assembly
4 - Power supply is bad. 4
– Replace power supply –
Return for rebuilding
5 - Horn assembly not
connected to power supply
5
– Check connection
C - Fabric cut is indented -
but not severed in two.
1 - Improper power setting 1
– Turn on power supply – check all
connections
2 - Power supply not turned on 2
– Turn on power supply
3 - Knife has become dull 3
– Change knife blade insert.
D - Fabric cuts on only one
side.
1 - Knife anvil is not parallel
with the horn.
1
– See knife-leveling procedure in the
blade replacement section.