Avery Dennison SS Finisher, User Manual

Page: 35 / 72

Users Manual SS Finisher Appendix C
– Label/Machine Speed

35
Appendix C
–
Label/Machine Speed
The SS Finisher is capable of producing labels from 25mm to 259mm in
length. Not all AVERY DENNISON printers will slow down sufficiently to
produce the minimum feed so the SS Finisher will not fall behind creating
a loop of material between the two products. AVERY DENNISON 6500
printer
will run at the slower speeds labeled as “False”. AVERY
DENNISON 636, 656, 676 and SNAP printers will slow down t
o 3” per
second minimum feed rate. Use the chart below to make the proper
format speed selection for the desired printer
636 and 656 printer speeds: 3”/sec, 4.5”/sec, 6”/sec and 7”/sec.
676 and 676LKP printer speeds: 3”/sec, 4”/sec and 5”/sec.
SNAP print
er speeds: 3”/sec, 4.5”/sec, 6”/sec and 7”/sec.
Note:
If running a SS Finishing Station with a LOKPRINT System
–
DO
NOT
run above 5” per second. The label will not be finished
properly and may not hold up in the application.
Print Speed Minimum Length
3 IPS
1” (25 mm)
4 IPS
1.6” (40 mm)
4.5 IPS
1.7” (42mm)
5 IPS
2” (52mm)
6 IPS 2.3
” (58mm)
7 IPS
2.8” (70mm)