Setting Supply Options
2-1
S E T T I N G S U P P LY O P T I O N S
This chapter explains how to select the supply type, ribbon, speed, feed mode, cut
mode, backeed, print position, supply position, margin position, cut position, dispense
position, backfeed distance, separators, skip index mode, rotate image, and print
contrast.
You may limit access to this menu to prevent changes by the users. Users are prompted
to enter a password when password protection is enabled.
The supply options are listed in the table below.
Option
Choices
Default
Supply Type
E Aperture/E Die Cut/E Black Mark/Continuous/ C
Aperture/C Die Cut/C Black Mark/C Tag Edge
E Die Cut
Ribbon
No/Yes/High Energy
Yes
Speed
2.5/4.0/6.0/8.0/10.0/12.0/Default
Default
Feed Mode
Continuous/On-Demand/Liner Takeup
Continuous
Cut Mode
Disabled/Cut Each Tag/Cut Each Batch/
Mode 3/Mode 4/Mode 5
Disabled
Backfeed
Off/On
Off
Print Position
-450 to 450
0
Supply Position
-300 to 300
0
Margin Position
-99 to 99
0
Cut Position
-300 to 300
0
Dispense Position
50 to 200
65
Backfeed Distance 10 to 200
65
Separators
No/Yes/Long
No
Skip Index
No/Yes
No
Error Action
Normal
Overstrike/Continue 1x – 5x
Normal
Rotate Image
No/Yes
No
Contrast
-699 to 699
0
Press
CANCEL
to exit an option without changing the setting.
2
Summary of Contents for Monarch Tabletop Printer 1
