Avery Dennison Monarch Tabletop Printer 1 System Administrator Manual Download Page 14

Page: 14 / 94

2-4

System Administrator’s Guide

S e t t i n g t h e S p e e d

Select the print speed in IPS (inches per second).  If print quality is important, reduce the
print speed - a lower print speed increases the print quality of labels.  Use premium
supplies when printing at high speeds.

Select

2.5 IPS

Print at 2.5 IPS.

10.0 IPS

Print at 10.0 IPS.

4.0 IPS

Print at 4.0 IPS.

12.0 IPS

Print at 12.0 IPS.

6.0 IPS

8.0 IPS

Print at 6.0 IPS.

Print at 8.0 IPS.

Default

Print formats with serial bar codes
at 2.5 inches per second and
formats with parallel bar codes at
6.0 inches per second.

When using Easy Setup to configure the printer for RFID supplies, the print speed

may be

decreased. For e

xample:

Inlay

Selected Speed

RFID Easy Setup Configured Speed

AD-318M5GWC

8.0 IPS

6.0 IPS
Easy Setup changes the printer to print 6.0 ips.

AD-318M5GWC

4.0 IPS

4.0 IPS
Easy Setup

does not

adjust the print speed.

Recommended Maximum Pint Speeds

Options:

Print Speed, inches per second

2.5/4.0/6.0

8.0

10.0

12.0

300 dpi
printhead

supported

not supported

Tags

supported

not recommended not recommended

TuffMark®
Supply

2.5 ips
maximum
recommended

not
recommended

Serial bar
codes

2.5 ips
maximum
recommended

not
recommended

Liner Take-up

supported

not supported

Cutter &
Stacker

supported

not supported

Peel Mode

supported

not supported

Bar Code
Verifier

supported

not
recommended

not recommended not recommended

Note:

If you change the speed, you must resend your formats or turn off the printer and
back on before the change takes effect.
If you change the speed

in offline mode

, turn off the printer then turn it back on

before the change takes effect.

Summary of Contents for Monarch Tabletop Printer 1






























































































Search results

Summary of Contents for Monarch Tabletop Printer 1

Reviews:

Brands by name

Popular brands

Avery Dennison Monarch Tabletop Printer 1, System Administrator Manual

Search results

Summary of Contents for Monarch Tabletop Printer 1

Reviews:

Brands by name

Popular brands