Avery Dennison Monarch Tabletop Printer 1, System Administrator Manual

Page: 55 / 94

Using Scripts 7-3
D e l e t i n g a S c r i p t
You can delete a script from the printer's memory.
Select To
No Does not delete the script.
Yes Deletes the script.
Note: The flash memory used by the script is not available for other scripts or fonts
until the flash memory is reformatted. However, when you format flash memory,
you must resend the script and any downloaded fonts to the printer.
E n a b l i n g S t a t u s P o l l i n g
Status polling allows you to obtain information about the readiness of the printer and the
current (or last received) print job.
Select To
Disable Do not use status polling.
Enable Use status polling.
U s i n g I m m e d i a t e C o m m a n d s
You can use immediate commands to reset the printer or cancel and repeat batches.
Immediate commands are turned on or off through an MPCL packet. Refer to the
Packet
Reference Manual (available on our Web site) for more information about immediate
commands and control characters.
Use this option to set whether the ADK script processes or ignores an immediate
command control character.
Select To
Disable ADK script ignores an immediate command control character.
Instead, the immediate command control character and immediate
command are treated as data.
Enable ADK script processes an immediate command control character and
performs the requested immediate command.