Avermedia NV 1000 User Manual Download Page 26

Page: 26 / 154

Chapter 1 Installing Hardware

Connect the 2 cards with the I/O cable.

The back panel of the cards is shown as below.

2. Installing 3 Optional Video Extension Cards

For users who want to install the Video Capture Card and 3 Video Extension
Cards, please follow the steps.

1.  Remove the PC case cover.
2.  Remove 4 brackets for the PCI slots. Save the screws.
3.  Insert the Video Capture Card and Video Extension Cards into the

available PCI slots and fix them.

It is important to fix the cards in sequence to avoid video
transmission trouble.

4. Connect the 4 cards with I/O cables as the following picture.
5. The lower-right picture is the back panel of 1 Video Capture card

and 3 Video Extension Cards.

Summary of Contents for NV 1000



























































































































































Search results

Summary of Contents for NV 1000

Reviews:

Related manuals for NV 1000

Brands by name

Popular brands

Avermedia NV 1000, User Manual

Search results

Summary of Contents for NV 1000

Reviews:

Related manuals for NV 1000

Brands by name

Popular brands