manualshive.com logo in svg

Avermedia NV 1000, User Manual

Share
Download
Avermedia NV 1000 User Manual Download Page 15

AVerMedia NV1000/3000/5000 User’s Manual 

   

 

xiii

WHAT WE WILL AND WILL NOT PAY FOR 

We will pay labor and material expenses for covered items. However, we will not pay for 
the following: 

1.  Removal or installation charges. 
2. Shipping 

charges. 

3. Any 

incidental 

charges. 

 

EXCLUSION OF DAMAGES 

THE MANUFACTURER’S SOLE OBLIGATION AND LIABILITY UNDER THIS WARRANTY IS 
LIMITED TO THE REPAIR OR REPLACEMENT OF A DEFECTIVE PRODUCT AT OUR OPTION. 
THE MANUFACTURER SHALL NOT, IN ANY EVENT, BE LIABLE TO THE PURCHASER OR 
ANY THIRD PARTY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGE (INCLUDING, 
BUT NOT LIMITED TO, DAMAGES RESULTING FROM INTERRUPTION OF SERVICE AND 
LOSS OF BUSINESS) OR LIABILITY LIMITATIONS OF IMPLIED WARRANTIES. 

There are no other oral or written warranties, expressed or implied, including but not 
limited to those of merchantability or fitness for a particular purpose. Any implied 
warranties are limited in duration to 15 months from the date of purchase. 

 

STATE LAW AND YOUR WARRANTY 

This warranty gives you specific legal rights, and you may also have other rights granted 
under state law. These rights vary from state to state. 

 

CONTACT INFORMATION 

Taiwan & International 
No. 135, Jian Yi Rd., Chung Ho City, Taipei, Taiwan   
TEL: 886-2-2226-3630   
FAX: 886-2-3234-4842

 

Web Site: www.avermedia.com

 

Summary of Contents for NV 1000



























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands