113
9.2.2.3 Record
Setting
In the Recording setup windows, click
OK
to accept the new settings, click
Exit
to exit without saving, and click
Default
to revert back to original factory setting.
Record Setting of IP Camera
(1)
(2)
(3)
(1) Camera Icons
Select the camera number you want to set the recording setting. To select all the cameras, enable the
ALL
check box. To select more than one camera,
Right click
on the camera icon. To select one camera only,
Left
click
on the camera icon. The camera icon turns purple when it is selected.
(2) Recording Mode
The horizontal blocks from 00 to 23 represent the time in 24-hour clock and the vertical block 1 to 7 represent
the day in the week block (Sunday to Saturday). To record in full 24 hours and 7 days a week, select the
recording mode and click the
~
button. If you want to only record at a particular time or day, click
Schedule
button and select the
Recording Mode
, and then click on the time or day blocks. When the system starts
recording a red triangle mark would appear at the upper left corner of the screen.
