manualshive.com logo in svg

Avaya Session Border Controller for Enterprise, Manual, Page: 8 / 78

Share
Download
Avaya Session Border Controller for Enterprise Manual Download Page 8

Title

Description

Audience

Design

Avaya Session Border Controller for
Enterprise Overview and
Specification

High-level functional and technical
description of characteristics and
capabilities of the Avaya SBCE.

Sales engineers, solution
architects, and
implementation
engineers

Implementation

Installing Dell R620

Hardware installation and preliminary
configuration

Implementation
engineers

Installing HP DL360 G7

Hardware installation and preliminary
configuration

Implementation
engineers

Upgrading Avaya Session Border
Controller for Enterprise

Procedures for upgrading to Avaya SBCE
6.3

Implementation
engineers

Deploying Avaya Session Border
Controller for Enterprise in
Virtualized Environment

Procedure to deploy Avaya SBCE on
VMware.

Implementation
engineers

Maintenance and Troubleshooting

Administering Avaya Session
Border Controller for Enterprise

Configuration and administration
procedures.

Implementation
engineers and
administrators

Troubleshooting and Maintaining
Avaya Session Border Controller for
Enterprise

Troubleshooting and maintenance
procedures for Avaya SBCE.

• Sales engineers

• Implementation

engineers

Training

The following course is available on the Avaya Learning website at 

www.avaya-learning.com

. After

logging into the website, enter the course code or the course title in the 

Search

 field and click 

Go

 to

search for the course.

Course code

Course title

5U00090E

Knowledge Access: Avaya Session Border Controller

Viewing Avaya Mentor videos

Avaya Mentor videos provide technical content on how to install, configure, and troubleshoot Avaya
products.

About this task

Videos are available on the Avaya Support website, listed under the video document type, and on

the Avaya-run channel on YouTube.

Introduction

8

     Deploying Avaya SBCE

August 2015

Comments on this document? [email protected]

Summary of Contents for Session Border Controller for Enterprise















































































Reviews:

No comments