manualshive.com logo in svg

Avaya Session Border Controller for Enterprise, Manual, Page: 56 / 78

Share
Download
Avaya Session Border Controller for Enterprise Manual Download Page 56

7. Select 

Exit Saving Changes

 and press 

Enter

.

8. On the confirmation screen, select 

yes

 and press 

Enter

.

CAD 0208 (Micro SBC)

Procedure

1. Insert USB flash drive in the USB port.

2. Reboot the server.

3. If the server is connected to the VGA console, press 

Delete

. If the server is connected to

the serial console, press 

Tab

.

The BIOS SETUP UTILITY is started.

4. Select the Boot menu option using arrow keys.

5. Select 

Boot Device Priority

 and press 

Enter

.

6. Select the first boot device and press 

Enter

.

7. Select the correct USB device from the list and press 

Enter

.

8. Press 

ESC

 to go to the Boot menu.

9. Select the Exit menu option using arrow keys.

10. Select 

Save Changes and Exit

 and press 

Enter

.

11. Click 

OK

 and press 

Enter

.

Installation

56

     Deploying Avaya SBCE

August 2015

Comments on this document? [email protected]

Summary of Contents for Session Border Controller for Enterprise















































































Reviews:

No comments