manualshive.com logo in svg

Avaya Session Border Controller for Enterprise, Manual, Page: 47 / 78

Share
Download
Avaya Session Border Controller for Enterprise Manual Download Page 47

6. Wait for the image to be written to the USB device.

Preparing a USB device on Linux

Before you begin

Download the image file from the PLDS website. The image file is named as: sbce-6.3.000-xx-

xxxx_<md5sum>.img

About this task

A USB storage device with a minimum size of 4 GB can be set up for install or upgrade of Avaya

SBCE.

Procedure

1. Copy the Avaya SBCE 6.3 USB image file on the linux system.

2. Ensure that the checksum of the image matches with the checksum value in the file name.

Run the 

md5sum

 command.

3. Plug in the USB device on the linux server.

The device can be detected as /dev/sda or /dev/sdb or /dev/sdc. Check with your system
administrator if you are not sure.

4. Run the following command: 

dd if=/path/of/the/SBCE_USB_image_file

of=/dev/sdX bs=16M

The command takes up to 10 minutes to complete.

Preparing a DVD

About this task

Use this procedure to prepare a DVD for installing or upgrading Avaya SBCE.

Procedure

1. Download 

sbce-6.3.xxx-x-xxxx.iso

 from the plds website at 

https://plds.avaya.com/

.

2. Insert the DVD in a Windows or Linux system.

3. Burn the iso image to the DVD.

Preparing a USB device or DVD for installation or upgrade

August 2015

Deploying Avaya SBCE     

47

Comments on this document? [email protected]

Summary of Contents for Session Border Controller for Enterprise















































































Reviews:

No comments