manualshive.com logo in svg

Avaya Session Border Controller for Enterprise, Manual, Page: 4 / 78

Share
Download
Avaya Session Border Controller for Enterprise Manual Download Page 4

Contents

Chapter 1: Introduction

............................................................................................................  7

Purpose

.................................................................................................................................. 7

Intended audience

................................................................................................................... 7

Document changes since last issue

..........................................................................................  7

Related resources

...................................................................................................................  7

Documentation

.................................................................................................................. 7

Training

............................................................................................................................  8

Viewing Avaya Mentor videos

............................................................................................. 8

Support

..................................................................................................................................  9

Warranty

................................................................................................................................. 9

Chapter 2: Hardware overview

..............................................................................................  10

Avaya SBCE servers

.............................................................................................................  10

Supported device types

.........................................................................................................  10

Panel descriptions

.................................................................................................................  11

Front panel (Dell R210–ii, Dell R210–ii XL)

........................................................................ 11

Rear panel (Dell R210–ii, Dell R210–ii XL)

........................................................................  14

Front panel (Portwell CAD-0208)

......................................................................................  15

Rear panel (Portwell CAD-0208)

....................................................................................... 15

Front panel (AMAX EMS)

................................................................................................. 16

Rear panel (AMAX EMS)

.................................................................................................  17

Front view of Dell R320 Server

.........................................................................................  18

Back view of Dell R320 server

.......................................................................................... 19

Front view of Dell R620 Server

.........................................................................................  20

Back view of Dell R620 Server

.........................................................................................  22

Front view of HP DL360 G7 Server

...................................................................................  23

Back view of HP DL360 G7 Server

...................................................................................  24

Front view of HP DL360p G8 Server

.................................................................................  25

Rear view of HP DL360p G8 Server

.................................................................................. 25

Specifications

........................................................................................................................ 26

Processors

.....................................................................................................................  26

System memory

..............................................................................................................  26

On-board storage

............................................................................................................  27

Ethernet port labels

.........................................................................................................  27

Interfaces

.......................................................................................................................  30

Chapter 3: Deployment process

............................................................................................ 33

Deployment process

.............................................................................................................. 33

Deployment checklist

............................................................................................................. 33

Chapter 4: Deploying options

................................................................................................ 35

Single server

......................................................................................................................... 35

4

     Deploying Avaya SBCE

August 2015

Comments on this document? [email protected]

Summary of Contents for Session Border Controller for Enterprise















































































Reviews:

No comments