manualshive.com logo in svg

Avaya Session Border Controller for Enterprise, Manual, Page: 16 / 78

Share
Download
Avaya Session Border Controller for Enterprise Manual Download Page 16

Number

Component

Description

4

Console Port

A standard Ethernet RJ-45 connector jack for
use in connecting a system console.

5

USB connectors

USB connectors connect USB 2.0-compliant
devices to the system.

6

Network Ports

Standard Ethernet RJ-45 connector jacks labeled
M1, A1, A2, and B1 for use in connecting to the
network.

7

F/D Button

The Factory Defaults (F/D) reset button that is
normally used to reset the device to its original
factory default settings.

Note:

This feature is currently not supported.

8

VGA Connector

A standard 15-pin female video graphics adapter
(VGA) connector used for connecting a monitor
to the system.

Front panel (AMAX EMS)

Number

Description

1

Over Temperature Indicator

2

LAN 2 Indicator

3

LAN 1 Indicator

4

Hard Disk Drive Access Indicator

Table continues…

Hardware overview

16

     Deploying Avaya SBCE

August 2015

Comments on this document? [email protected]

Summary of Contents for Session Border Controller for Enterprise















































































Reviews:

No comments