manualshive.com logo in svg

Avaya Session Border Controller for Enterprise, Manual, Page: 55 / 78

Share
Download
Avaya Session Border Controller for Enterprise Manual Download Page 55

3. Press F11 to start BIOS Boot Manager.

The system displays the BIOS Boot Manager menu.

4. Use arrow keys to navigate to the 

Select Hard drive C: 

option.

The system displays a list of devices.

5. Select the USB flash device and press 

Enter

.

HP DL 360 G8 connected to a VGA console

Procedure

1. Insert the USB flash device in the USB port.

2. Reboot the server.

The server takes a few minutes before showing any messages on the VGA console. The
system displays the F11 Boot Menu option at the bottom of the screen.

3. Press F11 to launch the Boot menu.

4. From the menu, select 

One Time Boot to USB DriveKey

 by entering the corresponding

option number.

HP DL 360 G7 and G8 connected to a serial console

Procedure

1. Insert a USB flash drive in the USB port.

2. Reboot the server.

The G7 server takes a few minutes before showing any messages on the serial console. The
system displays the message 

Press F9 key for ROM-Based Setup Utility

 at the

top of the console.

3. Immediately press 

Esc+!

 .

4. From the menu, select 

One Time Boot to USB DriveKey

 by entering the corresponding

option number.

Supermicro AMAX

Procedure

1. Insert the USB flash drive in the server USB port.

2. Reboot the server.

The system displays the Supermicro logo appears on the screen.

3. Press 

Delete

 immediately.

The BIOS Setup Utility is started.

4. Go to Boot menu option by using the arrow keys.

5. Ensure that the screen displays the 

ALL USB KEY

 is in the Boot priority order.

6. Go to the Exit menu option by using the arrow keys.

About installation

August 2015

Deploying Avaya SBCE     

55

Comments on this document? [email protected]

Summary of Contents for Session Border Controller for Enterprise















































































Reviews:

No comments