Avaya S8700-Series, Installing And Configuring

Page: 88 / 122

Chapter 8: Installation verification
88 Installing and Configuring the Avaya S8500-Series Server
Figure 11: LEDs on the back panel of the S8710 and the S8720 Servers
Additional server LED information
For more information on server LEDs, see
Maintenance Procedures for Avaya Aura
™
Communication Manager, Media Gateways and
Servers , 03-300432.
- (When S8400 is deployed as an ESS) . The S8400 ESS raises a major alarm when it
becomes active. The raising of this alarm also lights the red alarm LED on the
faceplate of the S8400 circuit pack.
Figure notes:
1. Not used
2. Not used
3. For hardware duplication mode on
the S8710, DAL2 fault (amber)
4. For hardware duplication mode on
the S8710, DAL2 power (green)
5. RJ45 link (green
6. RJ45 link (green)
7. Indicates active when on steady or standby mode
when blinking (blue)
This LED duplicates the Active/Standby LED on the
front panel.
8. Power supply (green)
2
3
iLO
VDCI
1
2
3
133 MGz
100 MGz
100 MGz
UID
2 1
D
AL1
DUP MEMOR
Y
RECEIVE MODE LINC SYNC TRANS MODE LINC A
CTIVE
msds871c KLC 093004
5 6
2
3
1
2
3
4
7
8