Avaya S8700-Series, Installing And Configuring

Page: 68 / 122

Chapter 6: IP interface configuration
68 Installing and Configuring the Avaya S8500-Series Server
8. To set the control interface, type
set control interface ipaddr netmask
and
press Enter , where
ipaddr
is the customer-provided IP address and
netmask
is the
customer provided subnet mask.
9. Type
quit
and press Enter to save the changes and exit the IPSI session.
10. Log back in to the IPSI using SSH.
11. Type
show control interface
and press Enter .
The system displays IP address, subnet mask, and default gateway information.
Verify that the proper information was entered.
12. If a default gateway is used, enter the gateway IP address with
set control gateway gatewayaddr
, where
gatewayaddr
is the customer-provided
IP address for their gateway.
13. Type
quit
and press Enter to save the changes and exit the IPSI session.
14. Log back in to the IPSI using SSH.
15. Use
show control interface
to verify the administration.
16. Type
exit
and press Enter .
Setting the VLAN and diffserv parameters
1. Connect to the IPSI and log in as
craft
.
2. To display the quality of service values, type
show qos
and press Enter .