Avaya S8700-Series, Installing And Configuring

Page: 85 / 122

S8730 LEDs
Issue 8 May 2009 85
Figure 8: LEDs on the front panel of the S8730 Server
Note:
Note:
The Active/Standby LED, which is labeled as 1 in Figure 8 , is on a push button.
When pushed, this button has no effect other than to turn off the LED
momentarily. The LED returns to the normal state within a few seconds after the
button is pushed.
Figure notes:
1. Active/standby LED
2. Internal health
3. External health
4. NIC 1 (Eth0) link/activity
5. NIC 2 (Eth1) link/activity
6. Power on/standby button/system power. Amber means
system shut down, but power still applied. Green means
system on. To turn off the power, press and hold the Power
button for several seconds.
7. Hard Drive LEDs
8. System Insight Display LEDs, which represent the system
board layout.
ms873lef LAO 082707
UID
1 2
FANS
INTER
LOCK
OVER
TEMP
I-PPM
DIMMS DIMMS
POWER
SUPPLY POWER
SUPPLY
PCI
RISER
CAGE
PPM
PROC PROC
5
4
3
2
1
6
8
7