Avaya S8700-Series, Installing And Configuring

Page: 14 / 122

Chapter 1: Introduction
14 Installing and Configuring the Avaya S8500-Series Server
l
Verify that the rail kit to support the server is available to install (S8400 installed in a G650
carrier only).
l
Verify that the rail kit to support the server is available to install.
l
Verify that the rail kit that is required to support the UPS is installed on the rack or available
to install. For how to install the rails, see the documentation that comes with the rail kit.
l
Verify that the equipment racks are grounded per local code. See Job Aid: Approved
Grounds (555-245-772).
l
Verify that the customer-provided AC power to the rack is from a nonswitched outlet.
l
Verify that cables for theTN2312BP (IPSI) circuit packs are labeled and run from the
control hardware rack to the port networks or that appropriate connectivity is provided.
Equipment specifications
!
Important:
Important:
The TN8400BP cicuit pack is compatible with Communication Manager Release
4.0.3 and later.
The components of the S8700-series Server control network consist of two servers, one or two
Ethernet switches, and two UPSs. The physical specifications for the control network
components are shown in
Table 1 .
Table 1: Control network components specifications
Component
Dimensions
English
(height x width x depth
in inches
)
Dimensions
Metric
(height x width x depth
in centimeters
)
Height
(u) Weight
(lb/kg)
Server
S8710, S8720,
or S8730
3.4 x 17.5 x 26 8.6 x 45 x 66 2 60/27
(loaded)
Ethernet switch:
C363T
C364T
1.75 x 17 x 14.4
1.75 x 17 x 14.4
4 x 43 x 37
4 x 43 x 37
1
1
11/5
11/5
UPS:
1000 VA
1500 VA
3.4 x 17.2 x 17.7
3.5 x 17 x 24
9 x 43 x 45
9 x 43 x 61
2
2
49.4/22.4
50/23