Avaya S8700-Series, Installing And Configuring

Page: 110 / 122

Appendix B: Installation troubleshooting
110 Installing and Configuring the Avaya S8500-Series Server
Troubleshooting the installation of the license file and
the Avaya authentication file
Problem Possible solution
Cannot get files from the RFA site
l
Provide the correct SAP number.
l
Provide the serial number for the reference IPSI.
Cannot install the license file
l
Ensure that two license files do not exist on the server.
If so, delete one of the files.
l
The file might be corrupt. Download the file again from
the RFA site.
l
Use binary mode to upload the file.
The server is in no-license mode
l
The license file does not have an IP address yet. This
situation is normal when the license file is first installed
because the file cannot see the IPSI.
l
After 30 minutes, the license file has not located the
reference IPSI. In a SAT session, type
reset
system 1
and press Enter to reset the 30-minute
clock.
Cannot use the administration
commands
l
The server might be in no license mode because the
30-minute timer lapsed. In a SAT session, type
reset
system 1
and press Enter to reset the 30-minute
clock.
ASG does not work
l
Re-install the Avaya authentication files.
Cannot install the authentication
file
l
Administer a super-user login on the active server.