Avaya S8700-Series, Installing And Configuring

Page: 48 / 122

Chapter 4: Server configuration
48 Installing and Configuring the Avaya S8500-Series Server
3. Click Execute Ping .
4. Verify that the ping was successful and indicates that the server is connected to the
customer network.
5. If DNS is administered, type the host name of a computer on the network.
6. Click Execute Ping .
7. Verify that the ping was successful and indicates that DNS is working.
If possible, have a customer representative perform the following test from a computer on the
network:
1. Click Start > Run to open the Run dialog box.
2. Type
command
and click OK to open an MS-DOS command window.
3. Type
ping serveripaddress
and press Enter , where
serveripaddress
is the IP
address of the server.
4. Verify that the ping was successful.
5. If DNS is administered, type
ping servername
and press Enter , where
servername
is
the host name of the server.
6. Verify that the ping was successful.
Configuring the modem
1. From the Installation menu of the System Management Interface, click Configure
Server .
2. Click Continue until you get to the Specify how you want to use this wizard page.
3. Select Configure individual services and click Continue .
4. On the menu on the left, click Set Modem Interface .
5. Select Change Modem Setting and click Continue .
6. In the Extra Modem Initialization Commands window, type the initialization commands that
are appropriate for your modem and the country of operation. Click Help for help on what
to enter.
For example, to change the country code to Japan, type
AT%T19,0,10
.
7. Click Change .
The system displays a message that indicates that a modem route was added
successfully.