Avaya S8700-Series, Installing And Configuring

Page: 45 / 122

Configuring the server manually
Issue 8 May 2009 45
Table 7: S8700-series Server Ethernet assignments
Note:
Note:
For S87xx server software duplication, the duplication link can only be assigned
to an Ethernet Interface that supports 1 Gb speed.
Performing the manual configuration
To configure the server using the manual method:
1. Log on to the System Management Interface.
2. From the Installation menu, click Configure Server.
3. Read and click through the Review Notices to get to the Select Method for Configuring
Server page.
4. Select Configure all services using the wizard and click Continue to get to the Set
Server Identities page.
5. Fill in the fields on the Set Identities page and subsequent pages:
l
Configure Interfaces
l
Configure ESS
l
Configure Memory (S8720 only)
l
Configure Switches
l
Set DNS/DHCP
l
Set Static Routes
l
Configure Time Server
S8710/S8720/
S8730 hardware
duplication and
dedicated control
network S8720/S8730
software
duplication with
dedicated control
network S8710/S8720/
S8730 hardware
duplication with
non-dedicated
control network S8720/S8730
software
duplication with
non-dedicated
control network
Control network A eth0 eth2 eth0 eth2
Control network B eth3 (if used) eth3 (if used) eth3 (if used) eth3 (if used)
LAN eth4 eth4 eth0 eth2
Duplication Link eth2 eth0 eth2 eth0
Processor
Ethernet (PE)
eth0 eth2 eth0 eth2