Avaya S8700-Series, Installing And Configuring

Page: 60 / 122

Chapter 5: IP interface translations
60 Installing and Configuring the Avaya S8500-Series Server
Adding the IPSI to the system
Use the IP Server Interface Administration - Port Network SAT screen to add an IPSI. The
information on this screen differs, depending on whether the IP addresses of the IPSI are static
or assigned automatically through DHCP.
1. Type
add ipserver-interface PNnumber
and press Enter .
2. For the Host field and the DHCP ID fields for the primary IPSI and secondary IPSI, if any:
l
For dynamic addressing, the DHCP server sets the Host field and the DHCP ID field.
Verify that the fields are populated with default data.
l
For static addressing, in the Host field, enter the IP address for the IPSI that is listed in
the Location field.
add ipserver-interface 8 Page 1 of 1
IP SERVER INTERFACE (IPSI) ADMINISTRATION - PORT NETWORK 8
IP Control? y Ignore Connectivity in Server Arbitration? n
Encryption? y
PRIMARY IPSI QoS AND ETHERNET SETTINGS
DHCP? n Use System Level Parameter Values? y
802.1p: 6
Location: 5AXX DiffServ: 46
Subnet Mask: /24 Auto? y
IP Address:
Gateway:
SECONDARY IPSI QoS AND ETHERNET SETTINGS
DHCP? n Use System Level Parameter Values? y
802.1p: 6
Location: 5B01 DiffServ: 46
Subnet Mask: /24 Auto? y
IP Address:
Gateway:
add ipserver-interface 8
IP SERVER INTERFACE (IPSI) ADMINISTRATION - PORT NETWORK 3
IP Control? y Ignore Connectivity in Server Arbitration? n
Encryption? n
PRIMARY IPSI QoS AND ETHERNET SETTINGS
DHCP? No Use System Level Parameter Values? y
802.1p: 6
Location:3A01 DiffServ: 46
Subnet Mask: /24 Auto? y
IP Address:
Gateway: