Avaya S8510, Manual, Page: 14 / 84

Job Aid: Replacing the Avaya S8510 server
14 Job Aids for Field Replacements (FRUs) for the Avaya S8510 Server
4. Release the rail lock by pushing the level in as you slide the server out of the rack (Note 3 in
Figure 2 ).
If you are re-using the SAMP/dual NIC
If you are re-using the SAMP and/or the dual NIC from the defective server, complete this
section. Otherwise, omit this section and continue with
Install the replacement S8510 server in
the rack on page 20.
Remove the cover of the S8510 server
!
CAUTION:
CAUTION:
Ensure that the power is completely removed from the server: power cords must
be detached from the power supply(ies) and the SAMP .
To remove the cover from the S8510 server to access internal components:
1. Use a #2 Phillips (cross-point) screwdriver to rotate the latch release lock counter-clockwise
to the unlocked position (Note 1 in Figure 3 ).