Avaya S8510, Manual, Page: 54 / 84

Job Aid: Replacing the Avaya S8510 dual network interface
54 Job Aids for Field Replacements (FRUs) for the Avaya S8510 Server
Configure the dual NIC
To configure the Ethernet interface settings:
1. At the Maintenance Web Pages select Server Configuration > Configure Server .
2. Click Continue through the review notices until you get to the Configure Serve r page with
"Specify how you want to use this wizard" at the top.
3. Select Configure Individual Services and click Continue .
The wizard displays a new left-side navigation panel.
4. Select Set Identities .
The Set Server Identities page displays.
5. Ensure that the Ethernet ports are mapped as they were before replacing the dual NIC (see
Record Ethernet interface settings on page 44):
6. If you need to change the mappings, click on Continue .
The Configure Ethernet Interfaces page displays.
7. Make any changes and click Change .
The status of the configuration update appears in the window.
8. When the update completes, the following message appears:
Successfully
configured ethernet interfaces
.
Test connectivity to the network
To test network connections from the server out to the network:
1. At the Web interface select Diagnostics > Ping .
The Ping screen displays.
2. In the Host Name or IP address field, type in the host name or IP address of a computer
on the network.
3. Click Execute Ping .
4. Verify that the ping was successful, indicating that the server is connected to the customer’s
network.
5. If DNS is administered, type in the host name of a computer on the network.
6. Click Execute Ping .
7. Verify that the ping was successful, indicating that DNS is working.