manualshive.com logo in svg

Avaya S8510, Manual, Page: 57 / 84

Share
Download
Avaya S8510 Manual Download Page 57

03-602953 Issue 1 June 2008

57

 

Job Aid: Replacing the power supply on the Avaya 
S8510 Server

!

Important:

Important:

Always check the Avaya Support Website for Product Support Notices at 

http://

support.avaya.com/japple/css/
japple?PAGE=ProductArea&temp.productID=162774

.

This Job Aid describes the procedures to replace either power supply on an Avaya S8510 
Server.

Before you begin

Verify that you have the following on site:

•

S8510 Second Power Supply, Material Code 700453871

Which power supply to remove?

•

If you are replacing the power supply in a server with 

only one power supply

, use the 

information in 

Replacing the power supply in the S8510 with only one power supply

on 

page 58 to replace the power supply.

•

If you are removing a power supply in a server with an 

optional dual power supply

, use the 

information in 

Replacing a power supply in the S8510 with dual power supplies

on page 62 

to replace the power supply.

Summary of Contents for S8510





















































































Reviews:

No comments