Avaya S8510, Manual, Page: 7 / 84

03-602953 Issue 1 June 2008 7
Job Aid: Replacing the Avaya S8510 server
!
Important:
Important:
Always check the Avaya Support Website for Product Support Notices at http://
support.avaya.com/japple/css/
japple?PAGE=ProductArea&temp.productID=162774
.
This Job Aid describes the procedures to replace an Avaya S8510 Server running Release 5.1
of Avaya Communication Manager.
Reusing hardware components
When replacing a defective S8510 server, you can re-use these components:
•
Server Availability Management Processor (SAMP), see Remove the SAMP from the
defective S8510 server on page 16.
•
Network interface card (NIC), see Remove the dual NIC from the S8510 server on
page 17
If either of these components are serviceable, Avaya recommends that you remove them from
the defective server and install them in the replacement server.
Replacement materials
Hardware and tools
Verify that you have the following equipment and tools on site:
•
S8510 Server (MID SIZE APP SRVR FOR CM), Material ID 700449119
Note:
Note:
Material ID 700449119 applies to the Avaya S8510 server, configured with 2 GB
memory, and running Communication Manager Release 5.1 or greater.
•
Customer’s software CD-ROM
•
Services laptop and crossover cable